FB80 Front vibrator on tractor – Olive growing

The olive shaker for efficient and economical harvesting

The FB80 is PELLENC's front-mounted shaker designed for olive growers looking to increase productivity without compromising on quality. With its clamp, the front-mounted shaker allows olives to be picked from the tree without damaging the bark or twigs. It offers excellent visibility of the clamp and speeds up each harvesting cycle. Highly manoeuvrable thanks to its front hitch, it is easy to use, and any driver can master it after a short training session. The FB80 trunk vibrator also significantly reduces your costs.

Find a dealerRequest a quote

 

• Request a demo

 

 

It harvests whatever you put in front of it

Enhanced productivity on site

Protection of trees and crops

Comfortable for everyday use

It harvests whatever you put in front of it

• It can be used to harvest olives, but also cherries (for canned or candied fruit), almonds, walnuts, oranges (for juice), plums, and so on.
• It can shake tree trunks between 8 and 80 cm in diameter, as well as scaffold branches.
• The clamp can be tilted to quickly move from one tree to the next

Enhanced productivity on site

• Optimised vibration transmission for maximum fruit removal
• Front hitch: quick manoeuvring and direct visibility of the clamp
• Harvest rate of up to 99% depending on fruit type, variety and ripeness

Protection of trees and crops

• Reverse vibration and adjustable vibration frequency (0 to 31 Hz) to adapt to each fruit and limit impact
• Cushions and flaps adapted to the age and diameter of the trunk
• No contact with fruit on the ground thanks to the telescopic arm

Comfortable for everyday use

• Controls accessible from the cab: settings within easy reach
• Excellent visibility thanks to the front hitch
• Quick and intuitive to learn for operational teams

FB80 front vibrator for mechanised olive harvesting

Front vibrator on tractor

Clamp-holder chassis suitable for all types of crops Straightforward and intuitive controls Simple and intuitive hydraulic controls from the tractor cab

The minimum distance between rows is 8 m and on the line a minimum of 6 m.

Four levers allow you to control everything. The vibration frequency is reversible and continuously adjustable so that you can harvest all types of fruit, from the easiest to the most difficult to shake free.

The functions are controlled very gradually, for precise work. The FB80 is equipped with a rear 3-point hydraulic unit and a set of cushions and flaps.

Testimonial:

Front shaker on FB80 tractor

“Thanks to this technology, which is unique in the world, as an olive grower I am very happy to have greatly reduced my harvesting costs while preserving my trees.”

Ali Kürshat

Ayvalik, Turkey

Technical features

Front shaker on FB80 tractor
Type of coupling	Front loader (with adapter plate)
Hydraulic power station	On 3 rear points
Length	2,23 m
Width	1,72 m
Height	1,50 m
Maximum working height	Depends on the front loader
Total weight	1 250 kg
Arm output range	300 mm
Clamp opening	Up to 800 mm
Movable jaw pliers	Cable clamping
Set of cushions and flaps	•
Clamp inclination	±30°
Vibration frequency	Adjustable from 0 to 31 Hz
Usage	Single-trunk and multi-trunk trees
Power consumption PDF	62 kW at 540 rpm (≈ 85 hp)
Tractor required	Standard 66 kW (≈ 90 to 120 hp)
Maximum working height	Depending on front loader
Min. distance between rows	7 m
Min. distance on the line	7 m
Plate for adaptation to front loader	•
Function controls	•
3-point rear hydraulic power unit	•

 

• DOWNLOAD CATALOGUE

Accessories and consumables

FLAPS

5 types of rubber flaps:

• 6 mm: young trees
• 10 mm: mature trees
• 15 mm: large adult trees
• Caramel flaps
• Felt flaps

Soft cushions for fragile trees

Hard cushions

FAQ

Front shaker on tractor

Is the FB80 suitable for all olive groves?

Yes. Thanks to its 800 mm clamp opening, ±30° tilt and specially designed cushions/flaps, the FB80 can be used on young and mature olive trees, whether single or multi-trunk. Maintain a minimum distance of 7 m between rows and 7 m along the line.

What tractor is required to use the FB80?

A standard 66 to 88 kW (≈ 90 to 120 hp) tractor with a 540 rpm PTO is sufficient. It is mounted on a front loader or front 3-point hitch via an adapter plate, with the hydraulic unit positioned on the rear 3-point hitch.

How can I preserve the bark and limit fruit loss?

Precisely adjust the frequency (0 to 31 Hz) and vibration orientation according to the stage of ripeness. Use cushions and flaps adapted to the diameter/age of the trunk and use the telescopic arm to avoid rolling over fallen fruit.

What are the routine maintenance operations?

Lubricate all points at the recommended frequency (some points twice a day), check the condition of the cushions/flaps and tightness daily, check the hydraulic hoses and the attachment to the front loader. Carry out seasonal preventive maintenance with an authorised PELLENC distributor.

What productivity gains can I expect?

Depending on how the site is organised (e.g. combination with the EXPAND tarpaulin), the cycles per tree are greatly reduced. Harvest rates of up to 99% are observed depending on the fruit, variety, ripeness and pruning method.

Also see

Harvesting

5000S buggy self-propelled trunk vibrator

The self-propelled shaker for intensive olive harvesting with precision, comfort and respect for the trees

Find out more

Harvesting

Expand R5090 tarpaulin

The automatic roll-out tarpaulin for faster harvesting while protecting olive trees

Find out more

HARVESTING

Electric shaker rake POWER 48

The fastest professional olives harvesting comb in its category.

Find out more

Harvesting

Olives Line towed harvester

The towed machine for faster and more efficient olive harvesting.

Find out more

Find a dealer

Our experts are on hand to answer all your questions. Find your local dealer now.

SEARCH