BUGGY 5 000 S Self-propelled tree shaker

The self-propelled shaker is the ideal solution for intensive harvesting of nuts and stone fruits

In modern orchards, the BUGGY 5000 S self-propelled shaker, which incorporates all of PELLENC's expertise in fruit harvesting, is the essential equipment for fruit growers who want to combine high yields with plant preservation. Capable of efficiently harvesting almonds, cherries, pistachios, apricots and mirabelle plums, it adapts to all terrain conditions thanks to its low centre of gravity and telescopic arm. Used in orchards around the Mediterranean (Spain, Italy, Morocco, Greece, Turkey, Tunisia, etc.), South America (Argentina, Chile) and Australia, it meets the requirements of producers on flat or sloping terrain and adapts to all varieties, including almonds, cherries, walnuts, plums and many more. With its customisable vibration programmes and ergonomic cab, the BUGGY 5000 S guarantees a fast, gentle and high-quality harvest.

Fast mechanised harvesting with the BUGGY 5000 S

  • Up to 1,200 trees harvested per day depending on variety, ripeness and site organisation
  • Adjustable vibration (8 programmes, 0 to 31 Hz) for harvesting olives, almonds, cherries, etc.
  • Front hitch: direct view of the trunk, quick connection without repositioning

Harvest without damaging the trunks, even on young trees

  • Dynamic clamping adjustable from the cab according to trunk diameter
  • Patented Fragile Trunk Kit for sensitive young trees (optional)
  • Adapted cushions and flaps: protection against bark stripping or rubbing

Ergonomic cab and intuitive controls for comfortable driving

  • Secure cab (roll bars, sun visor, soundproof glazing): long-lasting comfort
  • 2 joysticks to control clamping, vibrations, arm and tilt
  • Less fatigue, smooth cycles, intuitive operation even on long days

Work on slopes up to 60%: maximum adaptability in orchards

  • Low centre of gravity, maximum slope 60%, side-slope 45%
  • Three drive modes: snail, tortoise, hare
  • Lockable rear wheel for enhanced stability on uneven terrain

High-performance engine: work longer, consume less

  • FPT engine (120 hp) Stage V: power and environmental compliance
  • Automatic engine speed management: fuel consumption reduced by up to 30%
  • 120-litre fuel tank for a full day's work without refuelling

BUGGY 5000 S fruit harvesting tongs

Self-propelled vibrator for harvesting fruit

Telescopic support arm (1.10 m stroke) for precise positioning without rolling over fallen fruit. Sideways tilt of the gripper ±40° controlled from the cab to align with each tree. Dynamic clamping with adjustable intensity, and Fragile Trunk Kit (PELLENC patent, optional) to preserve the bark and work safely on young or sensitive trees.

Secure cab with anti-crush roll bars, sun visor and soundproof windows to reduce fatigue. Two joysticks centralise the functions: clamping, vibration, telescopic arm and tilt. The on-board computer displays tree counters (daily/seasonal/total), self-diagnostics and 8 vibration programs for optimal repeatability.

With a low centre of gravity and two fixed wheels at the front and one free wheel at the rear, it is instinctive to drive and allows you to anticipate its reactions. It can tackle a maximum slope of 60% and a 45% of side-slope.

Testimonial:

self-propelled tree shaker

We particularly appreciate the good visibility of the tree during work and the handling of the BUGGY 5000 S. The PELLENC BUGGY is the fastest on the market, offering us high productivity. We can harvest up to 1,000 trees per day while picking up to 98% of the fruit. Thanks to the Fragile Trunk Kit, which can be adjusted from the cab, we ensure excellent protection for the trunks.

N. ASSISSEL
Operations Manager at LESIEUR MAROC
BUGGY 5,000 S self-propelled vibrator
Length6,80 m
Width2,48 m
Height2,20 m
Weight5 500 kg
EngineFPT Stage V, 4 cylinders, 90 kW (120 hp)
Fuel tank120 L
AdBlue tank20 L
Hydraulic oil reservoir70 L
TransmissionHydrostatic 480 bar, 2 independent front-wheel drive wheels
Forward speed0 to 15 km/h continuously
Modes of advancementsnail / tortoise / hare
Night equipmentWorking lights
On-board computerClamp clamping force adjustment, 2 vibration modes, shaft counter (daily, seasonal, total), self-diagnosis, 8 vibration programmes...
Cabin comfortHeating
Air conditioning
ClampingAdjustable intensity dynamics
Vibration frequencyAdjustable from 0 to 31 Hz
Clamp support armTelescopic, stroke 1.10 m
Working height0 to 2.50 m
Side tilt clamp±40°, in-cabin control
Cushions and bibsMany choices to make when purchasing (young or fragile trees)
Rear wheelFree wheel, mechanically lockable in the forward direction
Fragile Trunk Kit (optional)Checking the clamping force of the clamp

 

● Standard equipment
Optional equipment

Fan

For continuous cooling of the clamp pads, which heat up during very intensive use.

Flaps

5 types of rubber flaps:

  • 6 mm: young trees
  • 10 mm: mature trees
  • 15 mm: large mature trees
  • Caramel flaps
  • Felt flaps
Soft cushions for fragile trees
Hard cushions
CB 80 clamp

Maximum diameter: 80 cm.

Fragile trunk kit

Protects the bark of young trees by automatically adjusting the clamp.

FAQ

BUGGY 5000 S self-propelled shaker

The BUGGY 5000 S is suitable for many crops: almonds, walnuts, pistachios, plums, cherries (for industry), and other species compatible with trunk shaking. The clamp can handle trunks up to 650 mm in diameter, depending on the choice of cushions and flaps.

Adjust the dynamic clamping from the cab according to the diameter and sensitivity of the trunk, then select one of the 8 programmes (0 to 31 Hz). In general, gradual clamping and a frequency adapted to the variety/ripeness are preferred in order to pick efficiently without damaging the bark.

The Fragile Trunk Kit (PELLENC patent) automatically optimises the clamping intensity on sensitive trees. Combine it with soft cushions and suitable flaps (6/10/15 mm, caramel or felt) to limit friction, especially on young trees and irregular trunks.

The machine operates on slopes up to 60% and side-slopes up to 45% (depending on conditions). Select "snail" for delicate approaches, "tortoise" for movement on site and "hare" for connections. The lockable rear wheel improves stability on slopes.

Up to 1,200 trees/day can be achieved depending on the organisation of the site, the layout of the rows, the maturity and the variety. The harvest rate can reach 99% depending on the fruit, size and settings (tightness, frequency, vibration duration).

Also see
Harvesting
FB80 front-mounted vibrator on a tractor
The front-mounted shaker, a simple and economical solution for mechanised orchard harvesting
Find out more
Harvesting
Expand R5090 tarpaulin
The automatic roll-out tarpaulin for a faster and high-quality harvest.
Find out more
HARVESTING
Electric shaker rake POWER 48
The fastest professional olives harvesting comb in its category.
Find out more
Harvesting
Almonds Line towed harvester
The towed machine for faster and more efficient almond harvesting.
Find out more
Find a dealer

Our experts are on hand to answer all your questions. Find your local dealer now.


SEARCH